Call system expansion

Signal repeater

Greater range for challenging spaces

The signal repeater receives radio signals from table call buttons and forwards them to the call system’s receivers. It can improve coverage in larger areas or premises with challenging layouts. The appropriate location is tested on site.

78 € per device

Enquire now Technical specifications Operating instructions

White signal repeater with two antennas — Signal repeater with two antennas

2 antennasfor reception and forwarding

433.92 MHzOperating frequency

DC 12 V / 1 APower supply

Up to 1,500 mIn open, interference-free conditions (manufacturer’s specification)

Signal repeater specifications

Specifications from the supplied Wireless PA-V3.0 manufacturer’s manual. Indoor range depends on walls, metal and sources of interference; it is tested for the intended location.

Power supplyDC 12 V / 1 A

Connector5.5 × 2.1 mm DC barrel connector

Frequency433.92 MHz, selectable

Receive sensitivity−113 dBm

Operating current< 250 mA

Standby< 10 mA

Transmit power according to manufacturer1300 mW

Housing (W × H)117,89 × 78,33 mm

Antenna height109,98 mm

Range according to manufacturerUp to 1,500 m in open, interference-free conditions (manufacturer’s specification).

During setup, match the frequency and check operation with existing table call buttons, pager watches and the monitor.

Signal repeater setup

Installation steps, indicator-light meanings and full technical specifications are available in the Instructions section.

Signal repeater operating instructions →

Greater range for your business

We work with you to identify where an additional signal repeater would help.

Enquire with no obligation